QBIC devices Android upgrade

Difficulty: expert

Learning Objectives

After reading this article, you’ll be able to:

  • Identify if an Android upgrade is available for your QBIC device
  • Deploy Android upgrade on QBIC device

 

Step 1 - Verify the required Android version for the app you want to install on your QBIC device

Verify System Requirements for Workplace apps and validate if your QBIC device is running the required Android version for the app you want to install - if you're still in doubt, check out Comparing Room Display, Kiosk app in Room mode & Mini Display!

Step 2 - Check Android Upgrade Instructions depending on device type

Check here which method is relevant for your upgrade depending on your device type, and find the instructions to upgrade QBIC device Android version using Device Control below.

Following Android upgrades are available for the different device types:

Model upgrade to Android 10 upgrade to Android 12 upgrade to Android 14

TD-1070 +

TD-1070 Lite

NA AVAILABLE AVAILABLE
TD-1060 AVAILABLE AVAILABLE NOT AVAILABLE
TD-0360 (Mini Display) NA NA AVAILABLE
BXP-320/321 (BOX PC) NA AVAILABLE AVAILABLE
BXP-350 (BOX PC) NA NA AVAILABLE

Warning

Do not rename the downloaded firmware files.
 

Choose your device model and the Android version you want to upgrade to.

TD-1070 & TD-1070 Lite

Depending on the start and target Android version, choose the correct upgrade path.

 Android 11 to 14

    Follow the steps below to upgrade the TD-1070 from Android 11 to Android 14:
 

  1. Upgrade to Android 14

  2. Verify the Android version

      On the device, go to Settings → About Device → Android Version and confirm that Android 14 is installed.

Warning

Do not rename the downloaded firmware files.

 

 Android 11 to 12

    Follow the steps below to upgrade the TD-1070 from Android 11 to Android 12:
 

   1. Check the current firmware

   On the device, go to Settings → About Device and check the Firmware Version / Build Number.

   If the version is below v1.0.2, upgrade to v1.0.7 first:

  2. Upgrade to Android 12

  3. Verify the Android version

      On the device, go to Settings → About Device → Android Version and confirm that Android 12 is installed.

Warning

Do not rename the downloaded firmware files.

 

 Android 12 to 14

    Follow the steps below to upgrade the TD-1070 from Android 12 to Android 14:
 

  1. Upgrade to Android 14

  2. Verify the Android version

      On the device, go to Settings → About Device → Android Version and confirm that Android 14 is installed.

Warning

Do not rename the downloaded firmware files.

 

TD-1060

 Android 8.1 to 10

    Follow the steps below to upgrade the TD-1060 from Android 8.1 to Android 10:
 

   1. Check the current firmware

   On the device, go to Settings → About Device and check the Firmware Version / Build Number.

   If the version is eual to or below v1.0.4, upgrade to v1.0.5 first:

  2. Upgrade to Android 10

  3. Verify the Android version

      On the device, go to Settings → About Device → Android Version and confirm that Android 10 is installed.

Warning

Do not rename the downloaded firmware files.

 

 Android 10 to 12

    Follow the steps below to upgrade the TD-1060 from Android 10 to Android 12:
 

   1. Check the current firmware

   On the device, go to Settings → About Device and check the Firmware Version / Build Number.

   If the version is eual to or below v2.0.3, upgrade to v2.0.4 first:

  2. Upgrade to Android 12

  3. Verify the Android version

      On the device, go to Settings → About Device → Android Version and confirm that Android 12 is installed.

Warning

Do not rename the downloaded firmware files.

 

TD-0360

 Android 12 to 14

    Follow the steps below to upgrade the TD-0360 from Android 12 to Android 14:
 

  1. Upgrade to Android 14

  2. Verify the Android version

      On the device, go to Settings → About Device → Android Version and confirm that Android 14 is installed.

Warning

Do not rename the downloaded firmware files.

 

Bxp-320/321

 Android 10 to 12

    Follow the steps below to upgrade the BXP-320/321 from Android 10 to Android 12:
 

   1. Check the current firmware

   On the device, go to Settings → About Device and check the Firmware Version / Build Number.

   If the version is below v2.0.4, upgrade to v2.0.4 first:

  2. Upgrade to Android 12

  3. Verify the Android version

      On the device, go to Settings → About Device → Android Version and confirm that Android 12 is installed.

Warning

Do not rename the downloaded firmware files.

 

 Android 12 to 14

Follow the steps below to upgrade the BXP-320/321 from Android 12 to Android 14.

Prerequisites

  • Install the Bridge Android 12 firmware before upgrading to Android 14, as described in Step 1.
  • Prepare a USB drive formatted as FAT or FAT32.

1. Upgrade to the Bridge Android 12 firmware

  • Download the Bridge Android 12 firmware file. This file applies to both BXP-320 and BXP-321.
  • Push the firmware update to the device using Device Control Manager. Follow Step 3 – Upgrade using Device Control.
  • After installation, go to Settings → About Device and check the Firmware Version / Build Number to verify that the Bridge Android 12 firmware has been installed.

2. Download the Android 14 image file

Download the correct image file for your device model:

3. Prepare the USB drive

Use the USB drive method for the Android 14 upgrade. The remote upgrade method is not recommended for this upgrade.

  • Ensure the USB drive is formatted as FAT or FAT32.
  • Copy the downloaded Android 14.img file to the USB drive.

4. Install Android 14

  • Insert the USB drive into the device.
  • Go to Settings → Firmware Update → FIRMWARE UPDATE.
  • The device will restart automatically and install Android 14.

5. Verify the Android version

On the device, go to Settings → About Device → Android Version and confirm that Android 14 is installed.

 

Warning

 

  • Do not rename the downloaded firmware files.
  • Use the Android 14 image file that matches your device model.

 

 

Step 3 - Deploy upgrade using Device Control

Follow steps 1 and 2 from Device Control for QBIC, to open Device Control on "QBIC Devices" tab in Chrome or Edge (insecure browsing enabled) and scan the relevant IP range to see all relevant QBIC devices on your screen.

  1. Select the Device(s) for which you need to upgrade the Android version
  2. Click Start Configuration

    image-20220818-142636.png

In the next screen, you'll see a bunch of options which we'll need when installing Spacewell apps, but are not required for this Android upgrade process.

  1. Right now, let's focus on the "Firmware" option:
  1. Follow the steps outlined above, relevant for the Android upgrade for your device type
  2. Press save to push the configuration to the device(s). You will see a status report and any potential errors here. ‪
  3. Wait a few seconds. Your QBIC device(s) will show a multi-colored circle, indicating Android version upgrade.
  4. Once your QBIC device reboots, check the Android version and Build version in Settings > About device.