Major Release October 2025

Version: 2025.10.30.1 1645

In these October 2025 release notes, you can read which new features and improvements are available in Maintenance Planning and which issues have been resolved.

Note: some functionality depends on your licence and user permissions.

At a glance

  • Copy multiple objects at once: you can now choose one destination folder for all selected objects.
  • One user role per user: you can now select only one role per user.
  • Defects list value is retained: a customised defects list category no longer disappears after saving.
  • Calculated quantity in the Findings subreport: the subreport now displays the calculated quantity.
  • 32 issues resolved: including issues in planning, building components, objects, findings, reports and user management.

New and updated

Copy multiple objects at once to one destination folder

You can now copy multiple objects to the same destination folder in one go. Previously, you had to choose a destination folder for each object. This took a lot of time when you wanted to copy many objects.

In the updated pop-up, you can now choose one destination folder for the entire selection. This allows you to copy large numbers of objects faster and with less risk of errors.

One user role per user

On the User roles page, you can now select one user role per user. Previously, a user could be assigned multiple roles at the same time.

Defects list value is retained when saving a building component

You can now change the defects list category of a building component in the building component grid without it disappearing after saving. Previously, a customised value was cleared if the selected category did not occur in a defects list.

Your manually entered value is now retained, even if it is not possible to link it to an existing defects list category. This prevents unexpected data loss.

Findings subreport displays the calculated quantity

The Findings subreport now displays the calculated quantity instead of the original action quantity.

Improved performance

Due to changes in the application, Maintenance Planning now works faster.

Textual changes

Texts have been updated in various places in the application.


Resolved issues

Planning

  • Priorities 10 and 11 were missing: when setting up planning based on priority, you could use a maximum of 9 priorities. You can now use a maximum of 11 priorities. Priority 0 has been discontinued.
  • Find and replace did not work for amounts with decimals: values such as 412.40 could not be found or replaced. This now works correctly.
  • Incorrect unit for action: the building component's unit was displayed in the action unit column (hvh ehd) instead of the action's unit. You also could not edit the action unit. The correct unit is now displayed.
  • Grouping was incorrect after refreshing or changing pages: grouping by cost type description was disrupted when you refreshed the page or went to another page and returned. The grouping is now retained.
  • Fields were missing from the column selector: among others, Building component - room and Building component - free code were missing. These fields have been added.
  • Start year could not be locked or unlocked during the same editing session: if you had already made other changes, you could only lock or unlock the start year after saving. You can now do this immediately, without first saving or cancelling other changes.

Building components

  • No warning when copying a building component: changes in the building component grid could be lost without warning. While you are editing a field in the grid, the action icons to the left of the Cancel button are now unavailable.
  • Discipline field was not populated using find and replace: after saving, the entered value was cleared again. The value is now saved correctly.
  • List of building components was not populated automatically: when adding a building component, you had to make a selection yourself. The list is now populated automatically, with all selected.
  • Multiple building components could not be added at once: if you selected multiple building components, an error message sometimes appeared. You can now add multiple building components at the same time again.

Objects and Object management

  • Value in reference field could not be removed: in the object details, you could not clear a selected value, such as strategy or ownership. You can now remove this value.
  • Quantity field defaulted to 0: for a new object, the Quantity field was set to 0. This value was also carried over into reports. The field now remains empty, so you can enter a value yourself.
  • Inspection date could not be changed in bulk: on the Object management page, you had to change each inspection date separately. You can now change the inspection date in bulk.
  • Deleted project folder reappeared: a deleted project folder without objects sometimes reappeared in the project explorer. Deleted project folders now remain deleted.
  • “No objects selected” message appeared even when an object was selected: the object selection now correctly displays the selected objects.
  • Changes were lost when switching objects: if you made a change and used the object selection to go to another object, your change was cancelled without warning. You now receive a message asking whether you want to save or discard the changes.

Findings and actions

  • Incorrect error message in the Actions tab: an error message appeared on the findings page even though all fields had been completed correctly. The message now appears only when there is an actual error.
  • “Continue without saving?” message appeared when switching quickly: this message appeared incorrectly when you quickly switched between findings using the arrow keys. You could also make changes in the Actions tab outside edit mode. You can now switch without incorrect messages, and the tab can no longer be edited unintentionally.
  • Note in action history was linked to the current action: when you edited the note of an ongoing action, the note in the history also changed. Notes in the history are now separate from the current action.

Reports

  • Incorrect content in the Customer information subreport: large values in the Content (m³) field were separated or rounded incorrectly. For example, 36000 was displayed as .360,00. The value is now displayed correctly.
  • Error when saving a composite report: the Order field could contain a negative value. If you enter a negative value now, you will see a validation error and the field will be highlighted in red.
  • Photos had incorrect rotation in the findings report: photos were sometimes rotated incorrectly in the report. The rotation is now correct both in the details screen and in the report.
  • Hide zero values option did not work: in the Financial planning main classification (condensed) report, rows with €0 remained visible. Zero values are now hidden correctly.
  • Total amount was divided over multiple rows: in the Financial planning (summarised) report, total amounts are now always displayed on one row.
  • Deleted reporting theme remained visible: a deleted theme remained in the settings menu, which could cause an error message. The theme is now deleted correctly. References to it are automatically changed to an available default theme.

Users, permissions and System administration

  • Error message for a user role without permissions: when assigning such a role, the message “Not all data has been entered correctly” appeared incorrectly. This no longer happens.
  • Technical names displayed for permissions: when a translation was missing, you saw a technical field name in the permissions overview. The English descriptions are now displayed correctly again.
  • Error message when opening an external environment: the message “Not all data has been entered correctly” no longer appears.
  • Extra comma before discipline: when linking a discipline to a user via System administration > Users, there was a comma before the first discipline. This comma is no longer displayed.

Grids and display

  • Quantity was not updated after changing the take-off sheet: the total in the grid only became visible after refreshing the page. The total is now updated immediately when you save the change.
  • Date format changed when copying and pasting: the day and month were sometimes switched, or a date could not be pasted. The dd-mm-yyyy format is now always used correctly.
  • Active filter was unclear: an active filter was displayed in bold. You can now recognise an active filter by its clear background colour.

More information

Do you have questions about this release? Please contact us.

We wish you every success with Maintenance Planning.