LoRa Gateways

Difficulty: expert

Content

Learning Objectives

After reading this article, you’ll be able to:

  • Select the connection values for your carrier

LoRa, short for LoRaWAN (Long Range Wide Area Network) is a network technique where sensor devices connect to gateways/hubs through radio frequency bands. LoRa enables long-range transmissions with low power consumption outside of the on-site WiFi network.

In general, Workplace Connectivity can be described as follows: LoRa sensors send data through a LoRa gateway to the LoRa Sensor Cloud, and Workplace picks up the data from that platform.

image-20220919-122304.png

All of the below gateways can be used together with all LoRa based devices: The gateways/hubs are actually just LoRa gateways and can hence also connect other LoRa devices (eg Elsys CO2 sensors or Sensative Strips also connect to the same gateway). In the future more LoRa devices can work on the same LoRa network.

→ They can all join on one happy private Lora network – you can mix all types of sensors and you can also mix different LoRa gateways in the same network.

You can find more information about the above on Sensor troubleshooting guide

Still available

Gateway/Hub

Connectivity

(see 4G SIM Cards )

Access needed

Ports to open on the network

YES

MerryIoT Gateway installation

WiFi, LAN

power plug + ethernet cable (if using LAN connectivity)

see chapter “Hardware & Network Requirements” for each gateway


YES

Pico Gateway (LAN,Cellular) installation

Ethernet, 4G

power plug + ethernet cable or 4G

YES

Outdoor Micro Configuration

Ethernet, 4G

power plug + ethernet cable or 4G

NO

Kerlink iFemtocell Evolution installation

Ethernet, 3G/4G

power plug + ethernet cable or 4G

NO

Tabs Mini Hub (WiFi) installation

Wifi

power plug

NO

Tabs Hub (Ethernet) installation (No longer available) *

Ethernet, 4G

power plug + ethernet cable