Platform Datasource Compatibility List

Introduction

There are many different ways to send data to the EMS. If you are not sure about which way to choose, please check out the following article: Start sending data.

Nomenclature

These are the names / concepts used in this article that you need to be familiar with: 

• FTP
• SFTP
• EMS
• API
• Email

Requirements

Before setting up a physical datasource in our platform, make sure that the datasource is compatible with our platform and you have already installed accordingly to send data. 

How does it work? 

If you already know how to send data, you must know that you have 3 options:

• Through a third party datasource integrated in the EMS
• Via the general FTP, SFTP or Email datasources, according to the file formats available
• Via API, with our special Virtual Datasource

Visualization 

In the following list, you will see all the datasource that are compatible with the EMS platform. Click on each of them to know more:

• AcuLink 710
• Accuvim II HTTP Push
• Aqualogy
• BlueBox
• Carlo Gavazzi SH2WEB24 - Via Generic FTP Datasource
• Carlo Gavazzi UWP 3.0 - Via Generic FTP Datasource
• Carlo Gavazzi VMU-C EM
• Cesinel ReCon T Classic
• Current Cost
• Circutor Power Studio or EDS
• Egauge
• EKM Push
• Elvaco CMe2100 or CMe3100
• Energomonitor
• Episensor
• eTactica EG2000 - Through the Virtual Datasource
• Fifthplay
• GreenBox
• IEC 870-5-102
• IntelliSense xserver.iot.200
• Microcom FTP
• oBIX
• Obvius Acquisuite
• OpenDomo
• Panasonic FPWeb2
• Satel DL160 or DL170
• Satel DL161 or DL171
• Satel Owasys
• Sauter Modu525
• Schneider EGX300
• Schneider COM'X 510 - Via Generic FTP Datasource
• Sentilo
• Sigfox
• Socomec DIRIS A40
• Socomec DIRIS G50
• Socomec DIRIS Digiware D50
• Socomec DIRIS Digiware D70
• Socomec DIRIS Digiware M-50
• Socomec DIRIS Digiware M-70
• Socomec Datalog H80
• Socomec Datalog H81
• Tridium JACE 8000
• Virtual Weather Station
• Webdyn EasyTunnel
• Webdyn EasyRouter
• WebdynRF Wavenis

Next Steps

Please proceed to access the article for the datasource you need information about and start your configuration!

To keep in mind/Frequently asked

If you don't see your datasource listed above, please contact our Support team or Customer success manager involved to make it compatible.